One-Minute Product Profile
By using latest low-impedance digital amplifier chip technology the new Techconnect Amp² module outputs a massive 2 x 20w RMS (at 8 ohms) but fits into the space of a Techconnect module.
Two Inputs are wired into the rear with removable phoenix connectors, however a new feature of this amplifier is that Input 1 is duplicated on the front panel with a minijack socket for convenience. This half-normalled input disconnects the rear terminal while in use.
Green D-Class Amplifier
Digital amplifiers use no power unless they are amplifying program, so even on at full volume; unless it is receiving input it is effectively off.Digital amplifiers also have the advantage of running cold so a bulky heatsink is not necessary… but don’t let size deceive you: the Techconnect Amp² can drive into a 4 ohm load allowing you to power up to four 8 ohm speakers (or two 4 ohm speakers).
A clear display makes the product easy to use and a simple soft-control interface gives instant access to controls. Because the control panel can be installed anywhere in the room it is more convenient than traditional powered speakers where access to the controls can be awkward.
Remote Control Included
IR receivers are positioned on the front for normal use and on the rear for integration with a control system such as the Techconnect Control².
Easy to Install and Uninstall
We have paid special attention to creating a robust product that is simple and easy to install; the inputs and outputs are all via removable phoenix connectors which allow non-technical end users to uninstall it very easily if required. Short input cables are included for connection to the rear of adjacent input modules on the Techconnect.
Wall Mounted and Secure
Ideal when you don’t have furniture to sit an amplifier on, and because it is mounted to the wall it is much less obvious as a target for theft. It is close at hand if volume adjustments need to be made, making it perfect for training rooms, boardrooms, and classrooms.
External Power Supply
The compact transformer measuring just 42 x 95 x 28mm (wide x tall x deep) has interchangeable power prongs which fix directly to the transformer chassis. If necessary a normal figure-8 power cable can be plugged into the transformer. A 3m DC tail which can be shortened means easy routing of power cable through trunking.
AMPLIFIER DIMENSIONS: 42 x 71 x 40mm
CARTON DIMENSIONS: 230 x 100 x 63mm
AMPLIFIER WEIGHT: 63 grams
PACKAGED WEIGHT: 1.1kg
INPUTS: 2 x Stereo inputs via removable phoenix connectors
2 x 20w @ 8 ohms
Total Harmonic Distortion: less than or equal to 1% (20Hz~22kHz)
Frequency response (line in): 80Hz~22kHz(±2dB)
Signal to noise ratio (line in): more than or equal to 98dB (A-weighted)
Rating input level/impedance: Line in 500mV/50k Ω
Power consumption (rating condition): less than or equal to 40W
POWER SUPPLY: 100-240v 50/60Hz AC External Power Supply – integrated transformer/plug type.
DC Output 12V 3A, DC Cable 4.8m. Transformer Dimensions: 96 x 44 x 28mm
Interchangeable prongs including UK, EU, AU, US.
Note: a normal figure-8 cable be plugged into the transformer.
WARRANTY: 2-year return to base
COMPLIANCES RoHS, WEEE & CE compliant
ORDER PART CODE: TC2-AMP2 [SAP:1872510]
Bundled with SP-1300 loudspeakers: TC2-AMP2+SP-1300W [SAP: 1703069]
Bundled with SP-1600 loudspeakers: TC2-AMP2+SP-1600 [SAP: 2649199]
Bundled with CS-1600 loudspeakers: TC2-AMP2 +CS-1600 [SAP: 2386006]