AV-1600 2 x 25w Digital Amplifier

Snapshot

> 2 x 25w RMS (at 8 ohms) low impedance digital power amplifier
> 4 x Stereo inputs / 1 x Stereo Pre-Output / 1 x Balanced Mic input with Phantom Power
> Equipped for use as a ‘Ceiling-Amplifier’ to amplify a projector’s audio output (so that you can use the projector remote control to switch)

One-Minute Product Profile

Details

Harnessing the latest digital amplifier and touch-control technology, the new AV-1600 is compact, flexible, easy to use and uses no power at idle.

Mounting Ears
Included Mounting hardware allows attachment to a wall, projector pole, or rack. It has 1U / half-rack-width chassis.

Backlit Dials
The backlit dials are clear and easy to use. Useful LED indicators show the volume levels even in low light environments.

Flexible Inputs and Output
4 stereo inputs (via phono connectors) accept input from a variety of sources and the AV-1600 features a line-level pre-output, which feeds the sound on to a subwoofer for bass reinforcement, or a tape recorder recording, or even to a larger amplifier if you need more power! Comes with input and output cables meaning it is ready for use out of the box.

Phantom Power
The microphone input is via a professional XLR connector, which means it is balanced to eliminate electro-magnetic noise induced on long cables, and outputs “Phantom Power” – a voltage which is required by lectern and other sensitive condenser microphones. This is unique to the AV-1600 in its class.

Ceiling Amplifier with ground lift
A unique feature is the ability to use it in tandem with a data projector in the ceiling, meaning you can intuitively use the projector remote control to select inputs and control volume. Simply mount the amplifier up in the ceiling above the projector (making it much harder to steal), and run all of the audio through the projector into the AV-1600. The AV-1600 has a power output socket so that the projector and amp can share the same power outlet, and it also has a ground-lift switch to eliminate noise sometimes induced on audio signals by data projectors. Easy!

Manual

Specifications

AMPLIFIER DIMENSIONS: 220 x 165 x 44mm

CARTON DIMENSIONS: 265 x 211 x 145mm

AMPLIFIER WEIGHT: 1.2kg

PACKAGED WEIGHT: 2.8kg

COLOUR: Black

INPUTS
4 x Stereo inputs via phono connectors
1 x Microphone inputs via balanced XLR

OUTPUTS
1 x Stereo Line-level output via phono connectors

TECHNICAL DETAILS
2 x 25w @ 8 ohms
Total Harmonic Distortion <2%
Frequency response (line in): 50Hz~17kHz
Signal to noise ratio (line in): 75dB
Rating input level/Impedance:
line in 400~450mV/47kohms
Power consumption (rating condition): <=100W

ACCESSORIES INCLUDED
1 x 2-phono to 2-phono cable 2m long
1 x 2-phono to 3.5mm minijack cable 2m long
1 x Euro IEC Power cable 2m long
1 x UK IEC Power cable 2m long
2 x Unshielded Speaker Cable 5m long
1 x Pair wall/pole mounting ears
1 x Pair rack mounting ears

POWER SUPPLY: 100~240V Internal Power Supply

WARRANTY: 2-year return to base

COMPLIANCES: RoHS, WEEE & CE compliant

ORDER PART CODE AV-1600 [SAP:2123319]
Bundled with SP-1600 loudspeakers: AV-1600+SP-1600 [SAP: 2649198]
Bundled with CS-1600 loudspeakers: AV-1600+CS-1600 [SAP: 2386005]